Power Distribution Switches, Load Drivers

Showing

of 4

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Switch Type	Number of Outputs	Ratio - Input:Output	Output Configuration	Output Type	Interface	Voltage - Load	Voltage - Supply (Vcc/Vdd)	Current - Output (Max)	Rds On (Typ)	Input Type	Features	Fault Protection	Operating Temperature	Mounting Type	Supplier Device Package	Package / Case
BTS6163DAUMA1 IC PWR SWITCH N-CHAN 1:1 TO252-5 Infineon Technologies	12,022 In Stock	1 : $7.60000 Cut Tape (CT) 2,500 : $4.15938 Tape & Reel (TR)	PROFET®	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	General Purpose	1	1:1	High Side	N-Channel	On/Off	5.5V ~ 62V	Not Required	21.5A	16mOhm	Non-Inverting	Auto Restart	Current Limiting (Fixed), Over Temperature, Over Voltage	-40°C ~ 150°C (TJ)	Surface Mount	PG-TO252-5-11	TO-252-5, DPAK (4 Leads + Tab), TO-252AD
ISP752TFUMA1 IC PWR SWITCH N-CHAN 1:1 DSO-8 Infineon Technologies	38,709 In Stock	1 : $2.63000 Cut Tape (CT) 2,500 : $1.15808 Tape & Reel (TR)	miniPROFET®	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	General Purpose	1	1:1	High Side	N-Channel	On/Off	6V ~ 52V	Not Required	1.3A	150mOhm	Non-Inverting	Auto Restart	Current Limiting (Fixed), Over Temperature, Over Voltage	-30°C ~ 85°C (TA)	Surface Mount	PG-DSO-8-24	8-SOIC (0.154", 3.90mm Width)
IPS161HTR IC PWR SWTCH P-CHAN 1:1 PWRSSO12 STMicroelectronics	1,707 In Stock	1 : $5.88000 Cut Tape (CT) 2,500 : $3.14613 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	General Purpose	1	1:1	High Side	P-Channel	On/Off	8V ~ 60V	Not Required	1.7A	60mOhm	-	-	Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO	-40°C ~ 125°C (TJ)	Surface Mount	PowerSSO-12	12-LSOP (0.154", 3.90mm Width) Exposed Pad
IPS160H IC PWR SWTCH P-CHAN 1:1 PWRSSO12 STMicroelectronics	2,832 In Stock	1 : $6.07000 Tube	-	Tube	Active	General Purpose	1	1:1	High Side	P-Channel	On/Off	8V ~ 60V	Not Required	2.5A	60mOhm	Non-Inverting	-	Over Temperature, UVLO	-40°C ~ 125°C (TJ)	Surface Mount	PowerSSO-12	12-PowerLSOP (0.154", 3.90mm Width)

Showing

of 4

Products in this family are solid-state devices used to connect or interrupt the flow of current to a supported load, under the direction of a logic-level control signal that is of itself incapable or unsuitable for supplying the load. They integrate the semiconductor switching device used to interrupt current flow and incorporate additional supporting components/functions such as over-voltage clamping, current limiting, and under-voltage lockouts, which differentiate them from similar IC and discrete components.