Open Standard Module (OSM), the latest industry standard for system on modules, is replacing credit card-sized modules with postage stamp-sized ones.
Important criteria for connectors in medical devices include electrical and mechanical performance, ease of use, industry standards, and extended testing.
Understand the role of gate driver ICs for controlling MOSFETs and IGBTs in order to select and apply the correct DC/DC converters to power them.
Designers can quickly and cost effectively implement three-phase monitor relays to protect expensive machinery from power faults.
RJ45 connectors are modular interconnection devices paired with a cable that deliver data communication to various electronic systems.
With the fourth industrial revolution and Industry 4.0, comprehensive and intelligent automation is defined by advanced controls, monitoring, and diagnostics.
Use integrated power supply ICs to quickly implement compact and efficient buck converters for factory automation, 5G and the IoT.
A discussion of the basic link budget model, key antenna specifications impacting link budget, and examples that can optimize link budgets.
How to use compact SMDs passive components to build smaller and lighter antenna arrays while simultaneously enhancing gain and beam forming capabilities.
Designers of medical systems can use off-the-shelf power supplies to meet demanding MOP, MOPP, and MOOP patient and operator safety requirements.
How to design a modular overlay network to connect legacy devices and islands of automation to support Industry 4.0 data processing optimization in the IIoT.
Specifying a passive radio frequency identification (RFID) asset tracking system is complex with uncontrolled conditions to consider during transport/storage.
Commercial vehicle parameters need to be monitored to prevent failures of such vehicles and extend the life of the vehicle.
Built around an integrated ToF sensor, an evaluation kit and associated software simplify development of 1D and 3D industrial sensing applications.
Take a modular approach to designing the analog front-end of an acoustic focusing flow cytometer to save time and space.
Visual signaling components quickly and effectively communicate machine data and other actionable information to personnel through lights or other visual means.
Pneumatic grippers are electromechanical devices used in industrial applications for grasping and lifting, holding, rotating, and placing objects.
A brief overview of what ultraviolet (UV) radiation is, the sources of UV radiation, and how it can be used to benefit human health.
Integrated 3D Hall effect position sensors can be used to implement fast, precise, and low power angle and position sensing for real-time control systems.
How to use silicon carbide (SiC) to make energy infrastructure systems more efficient and reliable with smaller carbon footprints and lower costs.