Advanced Thermal Solutions Inc

Brick Heat Sinks

ATS’ power brick heat sinks are specifically designed to cool eighth-, quarter-, half-, and full-brick size DC/DC converters

Image of ATS' Power Brick Heat SinkBrick DC/DC power converters are an essential part of PCB design. Their performance requires a stable temperature for optimum performance. ATS has produced a broad array of high performance heat sinks, based off of the patented maxiFLOW design, to effectively cool DC/DC power converters and power modules deployed in a host of electronics applications.

Features and Benefits
  • Can be used for DC/DC power converters and power modules, such as Vicor’s V24A3V3x200Bx and Murata’s MPDKN10_S
  • High performance maxiFLOW design features less pressure drop and more surface area that maximizes the effective convection (air) cooling
  • Provided with pre-assembled, high-performance Chomerics' T-766 phase change material
  • 20% cooler junction temperature than other brick heat sinks 
  • Reduces junction temperature (Tj) by more than 20%
  • Provided with three (3) sets of screws at 5 mm, 6 mm, and 8 mm lengths
  • Available in lengths:
    • Length: 23 mm to 58 mm
    • Width: 23 mm to 58 mm
    • Height: 6.1 mm to 22.9 mm
    • Fin tip to fin tip: 23 mm to 58 mm

Video: DC to DC Converters and Power Brick Heat Sinks

Brick Heat Sinks

ImageManufacturer Part NumberDescriptionAvailable QuantityPriceView Details
1/4 BRICK HEATSINK 58X37X11.4MMATS-1099-C1-R01/4 BRICK HEATSINK 58X37X11.4MM555 - Immediate$27.28View Details
1/8 BRICK HEATSINK 23X58X22.9MMATS-1186-C1-R01/8 BRICK HEATSINK 23X58X22.9MM265 - Immediate$30.05View Details
1/4 BRICK HEATSINK 37X58X11.4MMATS-1139-C1-R01/4 BRICK HEATSINK 37X58X11.4MM482 - Immediate$33.55View Details
FULL BRICK HEATSINK 117X61X11.4MATS-1109-C1-R0FULL BRICK HEATSINK 117X61X11.4M276 - Immediate$40.43View Details
1/2 BRICK HEATSINK 58X61X22.9MMATS-1146-C1-R01/2 BRICK HEATSINK 58X61X22.9MM221 - Immediate$41.85View Details
FULL BRICK HEATSINK 61X118X20MMATS-1151-C1-R0FULL BRICK HEATSINK 61X118X20MM2240 - Immediate$48.17View Details
1/8 BRICK HEATSINK 58X23X11.4MMATS-1179-C1-R01/8 BRICK HEATSINK 58X23X11.4MM122 - Immediate$22.12View Details
1/8 BRICK HEATSINK 23X59X11.4MMATS-1184-C1-R01/8 BRICK HEATSINK 23X59X11.4MM258 - Immediate$27.19View Details
1/2 BRICK HEATSINK 61X58X11.4MMATS-1104-C1-R01/2 BRICK HEATSINK 61X58X11.4MM2549 - Immediate$30.01View Details
1/2 BRICK HEATSINK 58X61X11.4MMATS-1144-C1-R01/2 BRICK HEATSINK 58X61X11.4MM316 - Immediate$35.32View Details
Published: 2016-04-20

Related Videos

ATS Explains - Thermal Interface Material
ATS Explains - Thermal Interface Material

Publish Date: 2018-01-26

DC to DC Converters and Power Brick Heat Sinks
DC to DC Converters and Power Brick Heat Sinks

Publish Date: 2016-07-07

Related Articles and Blogs

Feasibility Study of an LED-Based Lighting System Using Analytical Modeling A study of the heat loads for an outdoor LED-based lighting system using analytical modeling to determine the feasibility of the design with solar heat load.
Device Thermal Coupling on a PCB A look at how components on a printed circuit board thermally couple and the design considerations that help minimize heat dissipation problems.
Air Flow Measurement in Electronic Systems An analysis of circuit board air flow measurement techniques and the considerations required to obtain an accurate reading in this complex environment.

Related Product Training Modules

Introduction to Heat Sinks This module will review the use of heat sinks, including how a heat sink works, the factors that impact heat sink thermal performance, common heat sink materials, and thermal interface materials.
maxiFLOW Power Brick Heat Sink Technology ATS’s power brick heat sinks are engineered to create minimum pressure drop and maximize fin surface area
maxiFLOW™ Heat Sinks maxiFLOW heat sinks feature a low profile spread fin array that maximizes surface area. Available in a wide variety of sizes and shapes.