Settings
Fast Delivery
Free Shipping
Incoterms
Payment Types
Marketplace Product
Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Product List
To fit the DRF unit to the DIN rail, tilt the unit and push downward until the unit hits the stop. Push the bottom front side to lock it on the rail. Rock the unit lightly to verify that the lock is secure. To remove the DRF unit, either push down on the upper tab or rotate a flat blade screwdriver in the lower tab. Gently lift the lower front edge and remove the unit.
PTM Published on: 2015-02-20
New Zealand